Choosing Upvc Window Replacement Hinges
It’s not as difficult as it may seem to choose and fit the replacement hinges made of upvc. Make sure the arrows on the hinges face in the correct direction, and measure the thickness of the hinge arms on the frame opening (13mm or 17mm).
There are many different types of hinges to choose from, each with unique characteristics. This article will review the most popular kinds of uPVC window hinges and their advantages.
Egress/Easy Clean Hinge
They are a great choice for replacing or upgrading windows for fire escapes, as they are able to open at a 90-degree angle. They can also be removed to an easy clean position, allowing you to easily access the exterior of windows to clean them without climbing an overhang or climb a ladder at angles that could be dangerous.
Yale is among the most trusted and well-known brands in the field of home security. These hinges are suitable for any type of upvc door hinges replacement side hung window. By pressing a small button, the window sash will be slid to the side, and then into the easy-cleaning position. After closing, the sash will automatically return to its original operative position.
Both 13mm and 17mm are both available. Based on the size of your existing window, we recommend using our Egress Selection Guide to determine which product is best for your needs.
These hinges are designed to be used with standard side-hung frames, either uPVC or aluminium. The friction screw is used to adjust the resistance. This makes opening the windows more simple and reduces the chance of a mistaken closing in strong winds. They have been tested for over thirty thousand cycles, and they are compliant with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.
The Nico Egress Easy Clean friction hinge is easy to use and has no buttons or catches. It offers a convenient and safe option for emergency exit and cleaning. Firstly, open the window to the egress (full opening) position and then press the hinge retaining clip that is located on the inner side of the bottom corner. This will release both the top and bottom catches and allow you to move the sash towards the easy-cleaning position. Close the window once you have the sash in the easy-cleaning position. This will set the hinges back to their egress positions.
Fire-Escape Hinge
Fire Escape Hinges, often known as “Easy Clean” hinges are used to replace hinges on upvc window side opening windows to allow egress (fire safety) reasons. These hinges allow for more space in the event of fire. This type of hinge is required in any living space that has a window, as required by building regulations.
They feature an exclusive friction stopper that allows the window to be opened to 90 degrees and allows the opening sash to slide across when it is open for easy cleaning of the exterior side of the glass, without having to climb ladders. The hinges are easy to use and have no complicated buttons or catch mechanisms. They can be operated from the inside of the home using an easy, safe lever.
The hinges are manufactured in the UK by Cotswold and come complete with a child safety restrictor for day-to-day use that can be overridden with a hidden button, providing you with peace of mind that your children will not accidentally open the fix door hinge too far. The stack heights are 13mm or 17mm.
To order these hinges simply take a measurement of the length of your current side-hung window hinge which attaches to the frame (see the guidelines for measuring your upvc window hinges). Choose the right size hinge below.
Be aware that the measurement is taken from the component that attaches to the frame and not the sash. The actual hinge length may be shorter or longer based on the manufacture of your old windows. Also, when choosing the width of your hinge most upvc windows will fit a 13mm stack height but should your old frame has 17mm, then select the option for this. You can also utilize the 4mm packer to compensate for the difference. All hinges come handed (1 left and 1 right). Screws are not included in the hinges. If needed, they can be purchased separately. We recommend using our Upvc window hinge repair screws. They are specifically designed to enhance the performance of your hinges and allow them to function smoothly for longer. They have a reduced friction design and a better weather seal that is fitted with a new nylon reducer end cap.
Restricted Hinge
There are times when windows must open fully and this can be a challenge with hinges that are standard. The restricted child safety friction hinges help to overcome this problem and provide a solution when ventilation is required but access to clean up or escape in the event of fire isn’t possible. They restrict the amount of opening the sash and allow for the bypass of this restriction by pressing an appropriate button. They can be used for side and top-hung windows and are available in 13mm and 17mm stack heights.
The Nico Restricted Egress Friction Hinges blend the advantages of the standard restrictor, as well as a fire escape pivot to provide a simple but efficient way to meet building regulations. It is available in 13mm or 17mm stack heights and is suitable for both top and side opening uPVC window. It is available in a pair with one hinge being the restricted egress, and the other the unrestricted. This permits one hinge to be installed at the bottom and the other is set on top.
These uPVC restricting hinges have been tested to BS6375, part 2. They are intended for use on a window that isn’t able to be fully opened, like a small child’s bedroom. The mechanism limits how far the sash can open to a safe position of 100mm and then it re-engages after the window is shut.
These uPVC friction-type hinges can be used with any type of windows. They are particularly useful for windows that are hard to reach, like those in three-storey houses or ones that require the use of a ladder. They can be complemented with our range of security enhancements like hinge guards, protection plates for hinges or dog bolts for PAS 24 performance.
It is crucial to take measurements of the hinge on your current window to be able to find replacements that are the same size. The most efficient method to do this is by viewing the hinge in the image gallery and determining where you want it to be placed. Top hung hinges can be restricted on both sides and the side hung hinges are restricted only on one side.
Standard Hinge
A standard hinge has metal-to-metal contact, and there are no additional parts to decrease friction. It is available in many finishes and also has an NFPA-certified fire rating. For a quick way to determine the radius of your hinge lay it flat and line up the quarter and dime in two corners. If the dime is more snug, the corner is rounded by 1/4 inch. If the quarter fit better, it’s rounded to 5/8 inch.
The right hinge can make or break the appearance of your composite door hinges. It’s important to match the finish and style of your door hinges repair to the hinges to create a unified look that’s both functional and visually appealing.
