How to Replace the Replacement Key Battery For the Saab 9-3
saab key programming near me owners have to follow a series of unique steps to add a second ignition key. It requires dealer service using a handheld computer called Tech-2. Then a new key and transponder need to be bought and programmed to the car.
It is a good idea to rotate your keys so that one does not wear out more quickly than the other. This will also help to keep your keys in top shape.
Replacement Case
The new key fobs aren’t like the older Saab keys. They’re equipped with electronic devices that make it difficult to duplicate. This has made stealing car keys significantly more difficult than 20 years ago. It has also made it more expensive to replace lost keys.
Every owner of a Saab 9-3 should have at a minimum two functioning keys. If one is lost it costs a lot to add another to the car because it involves replacing the CIM module and re-programming the locking cylinders. Dealers charge between $100-$200 for this.
There are options to avoid these high costs. Some parts providers will use the code of an old key to cut a new metal blade for less than the cost of the dealer. The key must, however, be the same as the original one to function properly in your vehicle.
Follow these steps to replace the case. You’ll require a flathead screwdriver along with some patience. With the screwdriver, you can pry apart the plastic, and then take off the emergency key. Once you have the case open, remove the electronics and put them back into the new case. Make sure you put the correct badge and key back into the case, as well.
Replacement Battery
The replacement battery for the saab 9 3 key replacement 9-3 is an affordable component that can be replaced easily and quickly. This video tutorial on DIY from YouTube Cyclone Cyd shows how to replace the battery of the remote key fob in only four steps. This tutorial can be used for any modern-day saab key fob however, the procedure may differ slightly.
The button is typically located next to the saab 9-3 key not accepted contact service logo on the back of the fob. It is usually located just below the saab 9-3 key programming logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver into the tiny hole in this button. This should be sufficient to allow you to open the fob case so that you can change the battery.
After you have installed the new battery CR1632, you are able to put back together the remote key fob. Then, you can program it into your car. The whole process should take more than an hour, if not less. This is a simple procedure that doesn’t require special tools.
The process is a bit more complicated if you lose your key, but it is possible. The dealer will first need to read the VIN of the vehicle and order an alternative TWICE module, as well as a key blade that is matched to the unique code. After that, they’ll have to cut the replacement key and then program it using an innovative software tool called MDI.
Replacement Key Fob
The key fob is equipped with a battery that is used to lock and unlock your vehicle. The batteries last for a period of and eventually fail. This is a regular issue that happens with all cars, and the good news is that you can change the batteries in many key fobs without having to replace the entire case. You can buy fobs replacements on Amazon that come with all the electronics already in place, so you’ll just pop open the case and replace the batteries in the original case. It is important to remember that you’ll have to remove the emergency key first. you can do this by inserting a small flathead screwdriver into the slot that is located in the middle of the case. Work the screwdriver around the case, and it should split open, making it much easier to remove.
If you’re about to replace the keys, ensure you have spare keys, as this will reduce the total cost by a significant amount. If you have an extra key, ask the dealer to cut the key and program it for your car. This is less expensive than purchasing a new fob.
If you do not have a spare key one, you can add another key to your car, but this will require a lot of research and effort. The cost of adding a second key is about a few hundred dollars and it also requires programming of the car’s computer. This can be done by a professional, however it’s a costly option for the majority of owners.
Replacement Ignition
In contrast to earlier Saab automobiles, the current SAAB 9-3 models use an upgraded alarm system that is dependent on a coded keys. If you lose your sole key, it may be costly to get another one, as the car has to be equipped with a specific computer and be programmed to accept a new key. Dealers can even charge hundreds of dollars to program an entirely new key, when they are not able to do it.
If you’ve lost the only working key, a dealer will repair the computer in your car (known as the CIM or saab 93 key programming TWICE) to create the replacement, and will charge you a premium price for it. We can reprogram the EEPROM inside your car’s computer to be prepared for a new key. This will save you more than 50% off what you would spend at a dealer.
If you have owned a SAAB 9-3 for many years and you’re aware of the ignition keys are not very durable. They can get extremely sticky and the buttons are known to be removed from them every now and then It is recommended that you consider purchasing a new one if yours isn’t functioning properly. It’s good to know that replacing the ignition key isn’t as complicated as it seems and is fairly easy to do with the appropriate tools.
