Choosing Upvc Window Replacement Hinges
It’s not as difficult as it could seem to choose and fit the replacement hinges made of upvc. Make sure the arrows on the hinges are facing the correct direction and measure the thickness of the hinge arms on the frame that opens (13mm or17mm).
There are many different kinds of hinges, each with their own unique features. This article will focus on the most commonly used kinds of uPVC window hinges and the advantages they offer.
Egress/Easy Clean Hinge
They are a great option for replacing or upgrading your fire escape safety window because they can open to a full 90 degree angle. They can be removed in an easy-cleaning position that allows you to see the outside of windows without the need to climb ladders or lean at dangerous angles.
Yale is among the most reputable and well-known brands in the world of home security. They work with all kinds of uPVC side-hung windows. By pressing a tiny button, the window sash will be slid to the side, and then into the easy-cleaning position. When the window is closed, the sash will be returned to its original position.
Both 13mm and 17mm are available. Make use of our Egress Selection Guide to help you determine the best product for your window.
These hinges are compatible with standard side-hung frames made of aluminum or uPVC. They are fitted with a simple friction screw to alter the amount of resistance that is generated. This makes opening the windows more simple and reduces the chance of closing the window accidentally during high winds. They have been tested for over 30,000 cycles, and comply with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.
There are no buttons or catches There are no buttons or catches. Nico Egress Easy Clean Friction Hinge is easy to use and offers a practical solution for emergency egress and safe cleaning. The hinge retention clip is located in the inner corner of the bottom corner. This will release both the catches on the top and bottom allowing you move the sash towards the easy-cleaning position. Once it is in the easy-clean position, close the window to reset the hinges to their original position.
Fire-Escape Hinge
Fire Escape Hinges, often known as “Easy Clean” hinges are used to replace windows that open sideways for egress (fire safety) reasons. They allow for a larger opening in the event of fire. Building regulations require that this type of hinge has to be set in any habitable space with a window.
They have a unique friction stay that allows the window to open at 90 degrees and allows the opening sash to slide across the glass to glass hinges when it is open to make it easy to clean the external side of the glass, without having to use ladders. The hinges aren’t flimsy catch or buttons and are operated by a simple, safe lever that is accessible from the inside of your home.
The hinges are made in the UK by Cotswold and come with a child safety restraint for day-to-day use that can be overridden with a hidden button, providing you with peace of mind that your children won’t accidentally open the window too far. They are available in 13mm or 17mm stack heights.
To purchase these hinges, take a measurement of the length of your current side-hung window hinge which attaches to the frame (see the article on measuring your upvc window hinges). Then select the correct size hinge from the choices below.
It is important to note that the measurement is taken from the part that is fixed to the frame and not the sash, the actual hinge length may be slightly shorter or longer based on the manufacturer of your old windows. When choosing the width of the hinge the majority of frames made of upvc can accommodate the 13mm stack height however if your previous window frame measures 17mm, then select this option. Alternatively you can fit the 4mm packer to make up the difference. All hinges are supplied with two hands (1 left and one right). Screws are not included in the hinges. They can be purchased separately if you require. We suggest using our upvc window hinge repair (yogicentral.science) screws. These screws are designed to improve your hinges’ performance and allow them to operate efficiently for a longer. They have a lower friction hinges for timber windows design and a better weather seal with a new nylon reducer cap.
Restricted Hinge
There are instances when a window needs to fully open and this can be a problem using the standard hinge. These child safety hinges are a solution to this problem and are a great solution for situations where ventilation is required but access for cleaning or escape in the event of fire is not possible. They limit the number of times you can opening the sash and allow for the bypass of this limitation by pressing the button. They are available in 13mm or 17mm stack heights. They can be used for both top and side hung windows.
The Nico Restricted Egress Friction Hinge combines the features of a standard restrictor as well as an escape hinge to provide an effective and simple way to meet building regulations. It is available in 13mm or 17mm stack heights and can be used on both side and top opening uPVC window. It comes in two parts with one hinge being the one with restricted egress and the other hinge being unrestricted. This lets one hinge be installed at the bottom while the other hinge is placed at the top.
These uPVC hinges are designed to be used on windows that cannot be fully opened, like a child’s bedroom. The mechanism restricts how far the sash can open to 100mm in a safe distance and then re-engages when the window is closed.
These uPVC hinges with friction can be used on all kinds of windows. They are particularly suitable for windows that are hard to reach, like those in three-storey homes or those which would require the use of a ladder. These can be enhanced with our range security features, including hinge guard protection plate or dog bolts, in order to achieve PAS 24 performance.
When replacing a hinge on a window, it is essential to determine the length of the current hinge to ensure that you get replacements that are comparable in size. This can be accomplished by looking at the image gallery of the hinge before deciding where you would like it to be. Top hung hinges can be restricted on both sides, while side-hung hinges are only restricted only on one side.
Standard Hinge
A standard hinge has metal-to-metal contact and no extra parts to reduce friction. It is available in a variety of finishes, and is fire rated. To quickly determine the radius of a hinge, lay it out flat and align a quarter and dime in two corners. If the dime fits better and the corner is round by 1/4 inch; if the quarter fit better, it’s rounded by 5/8 inch.
The proper hinge can enhance or break the look of your door. It’s important to match the style and finish of your composite door hinges with the hinges to create a seamless look that’s both practical and visually appealing.
